|
|
Sports center
Rohlena, Jan ; Vitík, Jan (referee) ; Daněk, Lukáš (advisor)
The objective of the present thesis is to design a sports center and provide the relevant design documentation for it. The designed building is situated on a flat plot in Hradec Králové which is intended as a building plot or a sports/relax area. The designed sports center is a two-level building without cellar with a flat roof. The building foundations are designed as foundation strips, mainly from plain concrete. The external, loadbearing, and partition walls are designed with clay blocks POROTHERM. The floor structure is designed with prestressed concrete floor slabs SPIROLL. The thermal insulation is resolved with ventilated facade with facade panels. CEMBRIT SOLID. The building is divided into three individual functional units with one shared entrance. It consists of two sports halls with facilities designed for sportsmen and staff, and a gym together with the facilities for costumers. A restaurant and a kitchen are situated in the second floor.
|
|
|
The Steel Structure of a Residential Building
Špeta, Václav ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The master's thesis deals with a project of the steel structure of a residential building. The building is thought like sevenfloor balcony-access house. The access balcony is situated in atrium in the middle of the building, which is roofed with a shell dome. The regular hexagon creates a ground plan of each floor. Every floor is turned 30 degrees compared to the next floors. The longest cross dimension is 43 m (axial). The height of the building is 30,4 m (including copula envelope). The final structure is chosen on the basis of optimization of the structural variants. The climatic load angle structure falls into the locality of the town Brno. The vertical supporting structure is made from steel-concrete accoupled circular section columns. The floor structure is designed from the steel rolled section I and H. These support assembly of a horizontal structure. Some joists and girder are designed like accoupled with a concrete floor slab. The copula above atrium is made from glue laminated timber ribs. Infill rods are from steel tube. The top ring of copula is designed from the rolled section UPE.
|
|
|
Hygrothermal analysis of massive wooden structures
Uherka, Pavel ; Šuhajda, Karel (referee) ; Žák, Antonín (advisor)
This thesis deals with massive wooden buildings especially with regard to the current approach to their design, assessment and approval. In this thesis are shown future possibilities of development of traditional wooden buildings with regard to current thermal technical requirements. Theoretical considerations are then compared with measurements which were performed on massive wooden wall samples.
|
|
|
Construction technological project of Aquacentre Kouhoutovice
Bartoň, Ondřej ; Diaz, Yvetta (referee) ; Novotný, Michal (advisor)
The diploma thesis deals with construction technological project of Aquacentre Kohoutovice. The thesis handles technological prescription of compact external cladding assembly including supporting structure. The thesis also includes assessment of transport itinerary, itemized budget with bill of quantities, design of site equipment, time and financial plan, construction schedule, machine assembly, control and test plan and safety and health care policy.
|
|
|
The structure of a sport hall
Bednár, Michal ; Štrba, Michal (referee) ; Šmak, Milan (advisor)
The aim of this bachelor thesis is to design and assess the structural design of a timber multipurpose sport hall. The location of the proposed construction is located in Hodonín. The design of dimensions of the structure are 36 m x 55 m and a height of 10.8 m. The main beams are full-walled arch frames made of glued laminated wood. From a static point of view, this is a double-articular frame. The construction consists of a lumber of laminated wood, and steel fasteners. The stability in the longitudinal direction is secured by bonded laminated wood purging, and by steel transverse stiffeners. The bottom construction of the structure is solved by means of concrete feet into which it is anchored. The gages are made of grown wood, made up of columns and chils.
|
|
|
Riding Grounds in Žďár nad Sázavou
Jaitnerová, Vendula ; Blažek, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis deals with the project of the horse-riding grounds situated near the town of Žďár nad Sázavou. The complex of buildings consists of two riding halls, a groundskeeper’s flat, stables with a zone for riders and outside stable-boxes for horses. The buildings are laid out in a way to create a closed farmyard. There is a built-in unit located in the larger hall together with accommodation and restaurant with a great view to the riding hall. The horse-riding grounds are used for equitation In the first place. The two outside sandy riding arenas and the two indoor halls give an ideal opportunity for regular horse training as well as riders training. The halls would be also useful for holding the riding works all year round. It is possible to stable 19 horses in the indoor stable and 8 more in the outside stable-boxes in the farmyard. This diploma thesis deals with the project of horse-riding hall with a built-in unit, it also deals with a project for the groundskeeper’s flat and outside stable-boxes for horses. In the framework of the diploma thesis two specialties were elaborated – the project for heating in the built-in unit and the groundskeeper’s flat as well as the project for roofing the riding hall with the glue laminated timber girder. There are seminar paper and architectonic sketches included in the diploma thesis.
|
|
|
View tower Blansko-Hořice
Sotáková, Miroslava ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The purpose of the thesis is the design of a hexagon-shaped observation tower located in Blansko - Hořice. Solid wood and glue laminated timber elements were used for the design. Elements were reviewed according to current design standards. The height of the observation platform is 21,6 m above ground. The total width of the structure is 6,5 m, the total height is 24,6 m.
|
|
|
The Roofing of the Sport Hall
Stehlíková, Iveta ; Šmak, Milan (referee) ; Buchta, Stanislav (advisor)
The goal of this diploma thesis is designed and reviewed the roof of the timber construction of sports structure, the span is 50 m and the length is 90 m. The design of the structure is located in Ústí nad Orlicí. The shape of the hall is arc sector. The structure is designed from glue laminated timber, solid timber and steel load bearing elements. The main load bearing elements are truss girders, which static function as two hinged arch. The stability of the girders is ensured by purlins, transverse stiffeners and longitudinal stiffeners. The stiffeners are situated in five fields. Front sides are made by girts and truss columns.
|
|
|
The Roof Structure of a Multipurpose Sport Building
Malchárek, Robert ; Barnat, Jan (referee) ; Buchta, Stanislav (advisor)
The subject of the Diploma thesis is a design wooden structures of a multipurpose sport building in Šumperk. The floor plan measurements of the building are 45,0 x 48,0 m with the maximum height 15,0 m. The solution is choosen on the basis of two variants. The structures is designed with respect to ultimate and serviceability limit states. The multipurpose sport building is consist of 13 main truss centre to centre spacing 4,0m. The main structural system is design as the three-hinged arched structure made of solid timber and in the second variant as the arched structure made of glue laminated timber. The spatial rigidity of the structure is secured of diagonal bracing. The roofing is carried by rafter which are safed by purlin and then by upper chord. The steel columns are design as a part of gable wall. The project was carried out in the scia Engineer 2014 software. Some of the particular elements both variants were checked and designed by manualy calculating. The thesis includes structural design report, joints structures, drawings and production drawing the element of the three-hinged arched structure.
|
|
|
Single-family house
Jiříček, Zdeněk ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
This bachelor’s word deals with the process of a design documentation of a detached family house in a village called Janová. The building site is situated at the end of the family houses zone on the outskirts of the village. The house itself is located on the pot No. 905/105. It has two floors and no cellarage. The grounplan is going to be 21,7 metres in length and 7,4 metres in width. The basement is formed by the permanent formwork. The vertical framework beams are built of Porotherm Profi 24 and Porotherm Profi 30 systems, while the horizontal framework beams are built of Porotherm BN and make the ceiling. Wooden beams are used for the shelter. The roofs are flat covered by coating roofing.
|
guest ::
